ACEPOM GROUP

Hotline:   +86-0523-84268368
               +86-0523-84222458
High frequency induction heater
——————————————————————
Medium induction heater ———————————————————————
Large bearing heater
——————————————————————
High efficiency, small bearings  can be heated to 110 degrees within 5- 15s
Suitable for heating bearings with inner diameter from 20 to 120mm
The  medium induction heater  has the  high standards of efficiency and performance .Suitable for heating bearings with inner diameter from 40 to 300mm
The  large induction heater  has the  high standards of efficiency and performance .Suitable for heating bearings with inner diameter from 120 to 1200mm
MAIN PRODUCTS
ONLINE SERVICE
 Work Time
Mon to Fri :8:00-17:00
 Contact Details
Hotline 1:+86-0523-84222458
Hotline 2:+86-0523-84268368
文章附图

The running characteristic of modern papermaking machine is highly automatic production and running,

文章附图

The working characteristics of hoisting and transportation machinery are intermittent movement. Each

文章附图

In metallurgical industry, acepom bearing heater products are mainly used in caster, before and afte

文章附图

The characteristics of modern coal mining machinery are compact structure, good safety and reliabili

APPLICATION AREA
ABOUT US
CERTIFICATE

Since its establishment, ACEPOM has been committed to the development, production and sales of bearing installation and maintenance tools and intelligent testing instruments.The group takes the superior production technology and the exquisite craft as the safeguard, takes the high performance, the high standard, the safety environmental protection as the product localization, takes the consummation post-sale service and the technical guidance, according to the customer demand personalized customization as the service criterion, through many kinds of ways unifies the sales way to satisfy the domestic and foreign user demand.  

CUSTOMER CUSTOMIZATION CASE
CATALOG
Customized for different sizes of bearings
NEWS
15
2015/09

ACEPOM group (" ACEPOM ") recently signed a strategic coo...

15
2015/09

ACEPOM's new factory in Taizhou, Jiangsu province, was of...

17
2015/09

On 2 September 2015 UK: knowledge engineering firm ACEPOM...

More excellent products
TECHNICAL KNOWLEDGE

----------------------------------------------------------------------------------

矢量智能对象.png 

Why use induction heaters to heat bearings?

矢量智能对象_13.png         

Electric induction heating is an advanced, fast and controllable heating method. Compared with the traditional heating stove, oil bath and torch heating, it is easy to produce oil fume, waste oil and harmful to human health. Inductive heating has the advantages of safety and environmental protection.


----------------------------------------------------------------------------------

矢量智能对象.png 

How to prolong the life cycle of bearing?

矢量智能对象_13.png         

Installation is one of the key stages in the bearing life cycle. If the correct methods and tools are not used to install the bearing correctly, the service life of the bearing will be shortened. We recommend using induction heating to install the bearings.


----------------------------------------------------------------------------------

矢量智能对象.png 

What is the principle of induction heating?

矢量智能对象_13.png       

Compared with the transformer, the principle of induction bearing heater is to install a primary coil with more turns and a secondary coil with less turns on the same iron core. The voltage ratio of input to output is equal to the ratio of turns of the coil, while the energy remains unchanged. Therefore, the secondary coil produces a large current at low voltage. For the ACEPOM induction heater, the bearing is a short-circuit single turn secondary coil, passing through a large current under the condition of low AC voltage, so it produces a lot of heat.


----------------------------------------------------------------------------------

矢量智能对象.png 

How much will bearing heater expand bearing?

矢量智能对象_13.png         

When the bearing heater heats the bearing, the expansion of the inner ring is calculated as follows:

△ d = a * d0 * (t1-t0)

Where △ D is the diameter expansion of bearing or workpiece, unit: mm

A is the linear expansion coefficient of bearing steel, 1.25 * 10 ^ - 5

D0 is the initial diameter of bearing or workpiece

T1 is the temperature after heating the bearing

T0 is the initial temperature of the bearing

Generally speaking, the bearing with 100 inner diameter is heated to 100 degrees and the inner ring expands by 10 wires. (of course, it depends on the actual workpiece situation. The different thickness of cage material will affect the expansion coefficient.)